Assembling table KomTec, gripper, 12.0

Heavy base construction of the machine frame for a level work surface. Decking of the work surface with multilayer boards. 19 clamping bolts at the bottom for taking over the elements up to a thickness of about 300 mm (further element thicknesses on request) pin height 120 mm. On the end faces there are two electrical connections (240 V, 16 A) and two pneumatic connections (R1/2, coupling 7.2 mm) for the use of hand tools. Tilting over 3 hydraulic cylinders for element weights up to 4,000 kg to 85 degrees incline. Safety valve on the cylinders prevents unintentional lowering of the work surface. For the supply of master and gripper table, energy supplies are to be provided by the customer under the assembly tables free of charge. Equipping the gripper with motorized feed up to 2 m on large profile wheels and flat-running rails. For different element thicknesses the takeover distance to the master can be adjusted by a selector switch in 3 positions. Integrated additional concrete insert as tipping safeguard in the gripper. Drive via gearbox motor with soft start. Supply via traveling cable drag chain from below. Working area: - Element dimensions, length from approx. 1,000-12,000 mm - Element dimensions, width from approx. 550-3,800 mm with element overhang on one side - Overall dimensions, length 12,000 mm - Overall dimensions, width 2,500 mm - Element thickness from approx. 100-approx. 300 mm (further element thicknesses on request) - Clamp height: 120 mm - Working height/table height: approx. 700 mm