Assembly table KomTec GPM 12.0

with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling and roof elements in timber frame construction. - Heavy base frame of the machine frame for a flat work surface. - Clamping of the elements via 9 system clamping beams with plug bolts with pneumatic pressure cylinders. (Optionally, the number of system clamping beams can be changed) The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure - It can be clamped in two groups 5 pieces and 4 pieces, so that two elements can be clamped/processed simultaneously. - Paneling of the working surface as far as technically possible with wooden boards. (As an option, a punched plate is available) - Stop system opposite the clamping side with 17 plug bolts and laterally with 6 plug bolts for precise positioning of the elements. - Tilting device of the mounting station via 3 hydraulic cylinders for element weights up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated in the frame area of the mounting station. - The electrical control cabinet is likewise protected and installed under the mounting station. - Operation of the functions is via a control bottle. - On the two station end faces there is an air connection and sockets installed, and on the station longitudinal side there are 2 sockets each and 2 compressed air connections for coupling handheld devices installed. - The stations are built in a modular principle, so that they can be expanded later with a take-off station into a complete turning station. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Stroke of the clamping cylinders: 320 mm - Stop/plug bolt height: 120 mm - Working height: approx. 700 mm - Color RAL 7035 light gray - Weight approx. 4,000 kg