Automatic spray gun KaMa KR BM Optima

The Optima model was developed for the automatic coating of various panel-shaped products. It is extremely easy to operate and with a paint recovery system, it works very efficiently. It is supplied with a high-pressure pump and four spray guns as standard. Supply air and exhaust air system: The extraction system that filters the overspray from the exhaust air through paint-stop green and perforated paper filters, is part of the standard equipment. The supply air system, which draws clean air into the cabin through class F5 class filters into the cabin is also part of the Optima's standard equipment. Product scanning system: The scanner sensor bar recognizes the dimensions of the parts to be painted. This means that only the scanned parts are sprayed, which has the effect of the paint consumption is optimized and less paint is used. Paint recovery system The paint recovery system scrapes the paint off the feed belt and thus enables the overspray that has been deposited on the belt. The recovered ink can then be reused. Control system A color 7-inch touchscreen, which enables the control and storage of all functions and working parameters, is part of the standard equipment. With the optional IoT system, all production data can be can be monitored online and daily production reports can be sent. Spray arm: The machine is equipped with a spraying arm. The spray guns are installed in the Duo system installed on the spraying arm. The working speed can be set automatically via the touchscreen. The speed of the arm can reach up to 180 m/min. The portable design makes it easy to change guns and adjust angles and heights. adjustment of angles and heights. Spraying equipment: A high-pressure pump and four spray guns are included with the machine. This gives you a machine that is ready for immediate use. Application examples: Doors, door frames, decorative moldings, modular furniture, kitchen and bathroom furniture, glass, building material panels. Suitable lacquer materials: Polyurethane, water-based, acrylic, cellulose, UV primers, paints and varnishes, adhesives, water and solvent-based surface stains Technical data: - Max. Working width: 1000 mm - Min. working width: 50 mm - Max. Working height: 80 mm - Min. working height: 4 mm - Max. Working length: unlimited - Min. product length: 300 mm - Supply air fan: 8,000m³/h - Exhaust air fan: 8,000m³/h - Air consumption: 1000 nl/min. - Air pressure: 6 bar - Max. Max. speed of the lifting carriage arm: 1.5 m/sec. - Max. Feed speed: 7 m/min. - Optimum painting speed range: 2-2.5 m/min. - El. connected load: 11.25 kW - Dimensions: L:3.200mm W: 3200mm H: 2450mm - Weight: approx. 2.000kg