Wood frame construction table, KomTec, assembly table, turner

with plywood board, stackable The pictures show different versions. Please ask for our references. Geberstations, turning stations or up to 4 table systems with chain conveyors are available. The variable assembly station for universal use in the assembly of single- or double-ply wall-, gable-, roof- and ceiling elements as well as knee walls in frame construction. Heavy base structure of the machine frame for an absolutely flat working surface. The assembly station on which the locking mechanism and the beam arrangement can be positioned, tensioned and exactly angle-cut. - The width adjustment and pressing of the elements is performed motorically at the push of a button. - The positioning of the frame work is carried out by a movable pressure beam driven by motorized precision feed screws. - Subdivided pressing beam for simultaneous processing of 2 wall elements of different heights. - The pressing force is adjustable steplessly via an overcurrent relay. - Through the spindle drive, absolutely parallel pressing of the wall elements is ensured, even if several small wall elements are produced on the station at the same time. - The station is, as far as technically possible, fully clad with a plywood board. - The working height of the stations is about 700 mm. - The heavy machine construction is the basis for absolutely flat elements with an element weight up to 4.0 t. - 10 system grid beams with dowel pins, height 120 mm, embedded transversely into the work surface of the station, for inserting the dowel pins, for pressing wall elements and knee walls with a height under 2.50 m, and for pressing cylinders for slanted wall constructions. - Stop at bottom and on the left side with 47 interchangeable turning pins in stainless steel version; spacing of the supports for the stop pins, approx. 600 mm - Mounting device up to 80° (95°) inclination angle - On the two station end faces and on the station longitudinal side opposite the pressing beams, each 2 sockets and 2 compressed air connections for attaching hand tools. - The stations are built in a modular principle so that they can be extended later with a take-off station to a complete turning station. Working area: - Working surface length (element width): from min. 1,000 - max. 12,000 mm - Working surface width (element height): from min. 595 - max. 3,500 mm - Stop height: 125 mm - Working height/table height: approx. 700 mm (Optional other processing dimensions possible) Available options: - perforated sheet plate - hand insertion cylinder for perforated sheet plate - take-off table - chain conveyor - film dispenser and so on.