KomTec Universal GPM assembly table, timber frame construction

Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty, robust machine frame construction for a flat work surface. - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approximately 420 kg/4,200 N at 10 bar operating pressure. Clamping can be performed in two groups of 5 and 4 elements, allowing two elements to be clamped/processed simultaneously. - Sheathing of the work surface with wood panels wherever technically feasible. (A perforated metal plate is available as an option, as shown in the photo.) - Bottom stop system with 9 locking pins and 7 locking pins on the sides for dimensionally accurate elements. - Swiveling mechanism of the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated into the frame of the assembly station. - The electrical control cabinet is also installed under the assembly station for protection. - The functions are operated via a control knob. - A compressed air connection and a power outlet are installed on each end of the station, and two power outlets and two compressed air connections for connecting handheld devices are installed on each side of the station. - The stations are modularly designed, so that they can be expanded into a complete turning station with a receiving station, either immediately or later. You can see a turning station in Figure 3. - Further options: Assembly table without stand function Perforated sheet metal panels Other working dimensions available upon request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/pin height: 120 mm - Working height: approx. 700 mm - Color: RÁL 7035 light gray