KomTec Universal GPM assembly table

not installable, with pneumatic clamping device. The universally applicable mounting station for the manufacture of wall, ceiling and roof elements in timber frame construction. - Heavy base frame of the machine frame for a flat working surface. - Clamping of the elements over 9 system clamping beams with pneumatic air cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure It can be clamped in two groups 5 pieces and 4 pieces, so two elements can be clamped/prepared simultaneously. - Sheathing of the working surface as far as technically possible with wood boards. (Optionally, a perforated sheet plate is available, as shown in the photo) ) - Stop system bottom with 9 dowel pins and laterally with 7 dowel pins for dimensionally accurate elements. - Operation of the functions is via 2 pneumatic switches. (Option: operating bottle) - On the two station end sides there is an air connection and a power outlet installed and on the station longitudinal side there are 2 sockets and 2 air connections for coupling hand tools installed. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Stroke of the clamping cylinders: 320 mm - Stop/dowel height: 120 mm - Working height: approx. 650 mm - Color RAL 7035 light gray