UV roller coating system Hymmen PFC 1400

Proficoater Hymmen PFC - S 1400 Lacquering system for the application of UV-curing coating systems consisting of 3 positions: Pos. 1 Roll transport TRR 1400: Feed length: 2,000 mm Nominal width: 1,400 mm Usable width: 1,300 mm Working height: 900 +/- 50 mm Feed: 6 - 30 m/min FU control Carrier rolls: D = 80 mm, plastic coated Roll separation: 150 mm Pos. 2 Rolling coating machine Hymmen ELX-S / PFC - Manufacturer Hymmen - Type ELX - S / PFC - Year of construction 1995 - Working width 1300 mm - Working height 900 mm +/- 30 mm - Part height max. 100 mm - Coating roll 50 Shore - Roll diameter ~ 238 mm - Coating cylinder speed 6 - 45 m/min - Dosing roll hard chromed ~ 174 mm - Dosing roll speed 2 - 12 m/min - Roll transport - Length ~ 700 mm - Feed ~ 6 - 35 m/min - Total connection approx. 2 kW - With control cabinet - Voltage, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 % Pos. 3 UV channel Hymmen (Superfici) 1 R - Manufacturer Hymmen / Superfici - Type TU 166 - Year of construction 1995 - Number of tubes from above 1 pc - Tubes straightened - Tube power 80 W/cm - Bar transport 3,000 mm (+1,000) mm - Bar separation 80 mm - Exhaust line, fan 250 mm - Feed rate controllable ~ 6 - 30 m/min - Loading meters on truck 3.8 m - Location, in stock - Voltage, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % General data: Coating: from above Operator side: left Year of construction 1995 Working height: 900 +/- 50 mm, Effective usable width: 1,300 mm, Clearance height: max. 100 mm, Feed transport: 6 - 30 m/min, FU control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Connection power: approx. 16 kW, Overcurrent protection: 63 A on-site, Total length: approx. 5,660 mm, Total width: approx. 2,700 mm, Plate type: wood-based panels, Panel length: min. 300 mm, Panel weight: max. 80 kg/m², Coating: UV coatings solvent-free 60 140 DIN 4sec, Coating amount 3 - 40 g /m² ( Optional with different roller higher) EX area: The coating machine ELX-S is designed for cleaning with solvents temperature class T3. During installation and operation, it must be observed that outside a distance of 500 mm around the lacquered parts of the machine no flammable mixture as defined by the Explosion Protection Directive occurs.