Assembly table KomTec Universal GPM, timber frame construction

with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction, ceiling and roof elements in timber frame construction. - Heavy, basic construction of the machine frame for a flat working surface. - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups 5 pieces and 4 pieces, so two elements can be clamped/worked at the same time. - Planking of the working surface as far as technically possible with wooden boards. (A perforated plate is available as an option, as shown in the photo) ) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed protected under the assembly station. - The functions are operated via a control bottle. - A compressed air connection and socket are installed at both station ends, and at the and on the longitudinal side of the station there are 2 sockets and 2 compressed air compressed air connections for coupling of hand tools are installed. - The stations are built in a modular system, so that they can be extended to a complete turning station can be extended to a complete turning station. Working area: - Color RÁL 7035 light gray