Sold
Assembly table HESS PRO LIGNO - LP 12500
Location:North Rhine-Westphalia, Germany
Description
Overview Equipment:
- Erectable
- 2 divided press beams, motor-driven
- Perforated planking
- 4 plug-in clamping cylinders
- 2 hinged stops on end faces
- 2 longitudinal U-profile rails
Description:
The variable assembly station, manufacturer HESS PRO LIGNO - LP 12500 for
universal use in the assembly of single- or double-sided planked
wall, gable, roof and ceiling elements as well as kneelers
in frame construction.
Heavy basic machine frame construction for absolutely flat work surface.
- An assembly station on which the framing and joist layer can be positioned, laid out,
tensioned and nailed at precise angles.
- The positioning of the framework is done by two movable press beams
by means of motor-driven precision threaded spindles.
The width adjustment and pressing (tensioning) of the elements is
done by motor at the push of a button.
- Subdivided pressing beam 2 x approx. 6200 mm for simultaneous processing of
2 wall elements of different heights.
- The pressing pressure is infinitely variable, by means of overcurrent relay, adjustable.
- By the spindle drive is an absolutely parallel pressing of the wall elements
guaranteed and this also if several small wall elements, on the
station are manufactured simultaneously.
- The working height of the stations is approx. 700 mm
- 10 pcs. system grid beams, into which the plug-in bolts height 135 mm
from the press beam can be inserted,
for pressing wall elements as well as kneelers with a height
below approx. 2500 mm and of pressing cylinders for inclined wall constructions.
Stops:
- Stop at the bottom with 20 stop plates, stop height 135 mm
- Stop at the side, left and right one swiveling stop each,
height 120 mm.
- Stop on the press beam, 20 pieces plug-in bolts, height 135 mm,
distance of the receptacles for stop bolts, approx. 600 mm
- Additional stop on the press beam front side, removable
- Set-up device up to 85° angle of inclination
- Station front side each 1 piece electrical connection 230 V. and a
compressed air connection for coupling hand tools.
Working range:
- Working surface length (element width): from min. 0 - max. 12,500 mm
- Working surface width (element height): from min. 550 - max. ~ 3,000 mm
- Working height/table height: approx. 690 - 700 mm
- Year of construction:1997 in 2014 partially overhauled
Punched sheet surface:
- The station is as far as technically possible fully planked with perforated sheet D 17 mm,
grid approx. 625 mm, for laying out individual frame constructions.
4 pieces hand press cylinders
- pneumatic
- Quick grid via grid bolts for perforated plate
- Stroke 110 mm
- Pressure plate 130x120 mm
- Magnetic holder for the adjustment of the cylinders
- Operation via a hand lever valve
Colors:
- RAL 7030 stone gray
- RAL 1017 zinc yellow
Note on delivery/assembly:
(not included in the purchase price, can be offered on request)
- The assembly table must be transported in two parts each approx. 6350 x 2650 mm to be transported
.
- Erectable
- 2 divided press beams, motor-driven
- Perforated planking
- 4 plug-in clamping cylinders
- 2 hinged stops on end faces
- 2 longitudinal U-profile rails
Description:
The variable assembly station, manufacturer HESS PRO LIGNO - LP 12500 for
universal use in the assembly of single- or double-sided planked
wall, gable, roof and ceiling elements as well as kneelers
in frame construction.
Heavy basic machine frame construction for absolutely flat work surface.
- An assembly station on which the framing and joist layer can be positioned, laid out,
tensioned and nailed at precise angles.
- The positioning of the framework is done by two movable press beams
by means of motor-driven precision threaded spindles.
The width adjustment and pressing (tensioning) of the elements is
done by motor at the push of a button.
- Subdivided pressing beam 2 x approx. 6200 mm for simultaneous processing of
2 wall elements of different heights.
- The pressing pressure is infinitely variable, by means of overcurrent relay, adjustable.
- By the spindle drive is an absolutely parallel pressing of the wall elements
guaranteed and this also if several small wall elements, on the
station are manufactured simultaneously.
- The working height of the stations is approx. 700 mm
- 10 pcs. system grid beams, into which the plug-in bolts height 135 mm
from the press beam can be inserted,
for pressing wall elements as well as kneelers with a height
below approx. 2500 mm and of pressing cylinders for inclined wall constructions.
Stops:
- Stop at the bottom with 20 stop plates, stop height 135 mm
- Stop at the side, left and right one swiveling stop each,
height 120 mm.
- Stop on the press beam, 20 pieces plug-in bolts, height 135 mm,
distance of the receptacles for stop bolts, approx. 600 mm
- Additional stop on the press beam front side, removable
- Set-up device up to 85° angle of inclination
- Station front side each 1 piece electrical connection 230 V. and a
compressed air connection for coupling hand tools.
Working range:
- Working surface length (element width): from min. 0 - max. 12,500 mm
- Working surface width (element height): from min. 550 - max. ~ 3,000 mm
- Working height/table height: approx. 690 - 700 mm
- Year of construction:1997 in 2014 partially overhauled
Punched sheet surface:
- The station is as far as technically possible fully planked with perforated sheet D 17 mm,
grid approx. 625 mm, for laying out individual frame constructions.
4 pieces hand press cylinders
- pneumatic
- Quick grid via grid bolts for perforated plate
- Stroke 110 mm
- Pressure plate 130x120 mm
- Magnetic holder for the adjustment of the cylinders
- Operation via a hand lever valve
Colors:
- RAL 7030 stone gray
- RAL 1017 zinc yellow
Note on delivery/assembly:
(not included in the purchase price, can be offered on request)
- The assembly table must be transported in two parts each approx. 6350 x 2650 mm to be transported
.
Specifications
| Condition | Used |
| Stock Number | 0 |